TC ELECTRONIC Cab RS410 4X10″ Bass Cabinet Amp Cab Amplifier Speaker Cabinet

Revolution Is My Name
The RS410 is the culmination of our RS series. We did the RS112, RS210, RS212 and naturally progressed to this. But we wanted it to be something special. The RS410 is a perfectly matched 4 x 10″ driver + 1″ tweeter cabinet for those of you who want to bolster your sound for an even bigger impact.

The RS410 is an 8 Ohm, 600W cabinet that will allow you to instantly get the loudness and tight response necessary, whether you are on stage or in the studio. The RS410 fits perfectly into the ‘stackability’ system of our existing RS212 and RS210 cabinets.

Vertical Stacking
Equipped for a Life of Rock’n’roll
Custom Eminence Drivers
Stack ‘Em High!
We do not believe in conventions or rules. Sure, you adhere to the rules to a certain point – but then you break them! That thought is what lies behind our unique vertical stacking concept that frees up space on the stage, takes weight off your back and most importantly, lets you hear every detail of your playing without sacrificing low-end punch.

The RS cabs come in 4 models: 4×10″, 2×10″, 2×12″ or 1×12″, and you can mix and match as well as stack them both vertically and horizontally as you see fit.

Fat Tone, Skinny Weight
If you have a crew of roadies to handle your gear, weight is not a concern of course, but if you have to handle your own rig after a long gig, you know that a 130 lbs. 8×10″ cab can suddenly transform itself from a source of sound to Mission Impossible…

Enter our RS cabs. They pack some serious power, but that does not translate into serious weight! In fact, you’ll find it a breeze to load and unload the van when you’re gigging with our range of RS bass cabs.

Dual Drive
No, we’re not talking about overdrive here… When we decided to get into making bass cabs, we did it like we do everything we attempt: 100%. Otherwise, what’s the point?

So we teamed with the speaker gurus over at Eminence to design a dual-concentric driver that fits a 1″ tweeter inside the main driver.

You may not be able to see it, but it’s definitely there making those crispy highs that add a touch of magic to your tone.

RS410 Tech Specs

Dimensions:

W x H x D 664 x 596 x 427mm

Weight:

37 kg / 82 lbs

Power handling:

600 Watt

Enclosure:

18mm plywood side panels, 18mm rounded carved hardwood corners

Surface treatment:

‘Anti-skid’ dual component surface

Porting:

Dual front porting

Woofer:

Eminence custom 10″

Tweeter:

Eminence 33mm voicecoil, titanium diaphragm

Tweeter adjustment:

L-pad (off – 0dB)

Impedance:

8 Ohm