Blackstar Artisan10 AE Anniversary Edition Combo Electric Guitar Amplifier NEW!

BLACKSTAR

BLACKSTAR ARTISAN 10AE ANNIVERSARY EDITION

BLACKSTAR 10th ANNIVERSARY GUITAR AMPLIFIER ARTISAN 10 AE LIMITED EDITION COMBO

2017 saw Blackstar celebrate 10 years of glorious UK inspired tube tone. To celebrate this important landmark Blackstar built three limited edition 10W single-ended valve amplifiers – all drawing on the sound and innovation of iconic Blackstar lines – Artisan, Artist and Series One.

To celebrate their 10th anniversary, Blackstar built 1000 of the Artisan 10 AE combo amplifiers for the world.

• 12AX7/ECC83 preamp valve
• EL34/6CA7 power valve
• Foot switchable Boost and Reverb
• Specially voiced Reverb, speaker emulated output and effects loop
• Celestion 70/80 loudspeaker
• Three Year Warranty

In less than 15 years, Blackstar have confirmed their position as one of the most innovative and respected guitar amplifier manufacturers on the planet.

2017 saw Blackstar celebrate 10 years of glorious UK inspired tube tone. To celebrate this important landmark Blackstar built three limited edition 10W single-ended valve amplifiers – all drawing on the sound and innovation of iconic Blackstar lines – Artisan, Artist and Series One.



This is the Blackstar Artisan 10 AE anniversary edition, a low-gain amplifier designed to give you that classic British crunch tone.

Utilising an ECC83 tube in the preamp section along with a EL34 power tube, the result is that glorious British guitar tone that breaks up beautifully to deliver that classic organic grit and grind when pushed hard.

You shouldn’t have to work hard to achieve great toned to that end, Blackstar have kept the control panel deceptively simple with a gain, tone, reverb and master volume control. But…switch on the hot preamp boost and hang on! This is the Artisan’s signature authentic chunky sound, the perfect timbre for rock and indie music. Ideal for rhythm or as an articulate lead tone in the style of Billy Gibbons.

Quarter inch speaker outputs are on hand for 8 and 16 Ohm cabinets. You’ll also find a 6.35mm (1/4″) emulated speaker output that is tapped directly after the power amp to ensure you get the tone of your EL34 fuelled power-amp stage. This output is stereo, so you can use it with headphones as well as PAs, recording interfaces and mixers.

The built-in digital reverb is simply superb – dial in a little for subtle ambience or wind it up for full immersion. The effects loop lets you route external gear right into the amplifier’s path, and a footswitch input gives you control over the boost and reverb sections. A single-button footswitch for controlling the boost is included (you must press the boost button so it is on for the footswitch to work).

Blackstar Artisan 10 AE Specs

• Amplifier Type: Tube
• Output Power: 10 W RMS
• Channels: 1
• Preamp Tubes: 1 x 12AX7/ECC83
• Power Tubes: 1 x EL34/6CA7
• Output Impedance: 8/16 Ohms Mono
• Effects Loop: Yes, Series
• Built-In Effects: Distortion/Overdrive, Spring Reverb
• Master Volume: Yes
• Inputs: 1 x 6.35mm (1/4″) Mono Instrument
• 1 x 6.35mm (1/4″) Mono Effects Return
• 1 x 6.35mm (1/4″) Stereo Footswitch
• Outputs: 1 x 6.35mm (1/4″) Mono Effects Send
• 1 x 6.35mm (1/4″) Stereo Emulated Speaker
• 3 x 6.35mm (1/4″) Mono External Speaker
• Channel 1: Gain, Tone
• Speaker Through/Output: 3 x 6.35mm (1/4″)
• Configuration 1 x 12″ Speakers
• Cabinet Type: Straight Semi-Open Mono
• Power Rating: 10 watts RMS
• Input Impedance: 8/16 ohms Mono
• Dimensions: W473.0 x H421.0 x D251.0 mm / 18.6 x 16.6 x 9.9″
• Weight: 14.9 kg / 32.85 lb